Category
Recently Viewed Products
-
IEST G-CC1001
$165.00$99.00 -
ANS 10.7
$140.00$84.00 -
AS 1012.18
$26.15$15.70 -
AWS PRGWA
$70.00$42.00 -
AWS A5.1/A5.1M
$79.00$47.40
ULC 716.3
$160.00 $96.00
Standard for Exterior Insulation and Finish Systems (EIFS) – Design Application (CAN/ULC S716.3-12)
standard by Underwriters Laboratories of Canada, 2012
This Standard contains requirements for the design, selection and application of exterior cladding utilizing Exterior Insulation and Finish Systems (EIFS) that meet the requirements of CAN/ULC-S716.1, and for the interfaces between EIFS and other building components.
This Standard applies only to EIFS used in combination with a drained air space and liquid applied water resistive barrier (LA-WRB), as an exterior wall cladding system.
This Standard addresses the components forming the substrate to which the EIFS is attached only insofar as they impact the proper performance of the EIFS. This Standard does not address the structural design of the substrate.
Cladding systems where the reinforcement is the supporting element of the rendering, e.g., stucco, are not part of this Standard.
The use of mechanical fasteners is outside the scope of this Standard, – refer to Annex A for further information.
This document does not purport to address all the aspects related to EIFS design, selection and use. The use of this Standard requires a working knowledge of applicable federal, provincial and local building codes and regulations, as there may be other design, selection, or application considerations for specific installations that are not addressed by this standard.
This document is intended to provide detailed information pertaining to the design, selection and application of EIFS for building designers, building code officials, product manufacturers and contractors and to provide information that will promote satisfactory performance and durability of EIFS.
Product Details
- Edition:
- 2
- Published:
- 2012
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
ULC 8754
$264.00$158.40Add to cartStandard for Holders, Bases, and Connectors for Solid-State (LED) Light Engines and Arrays (CAN/ULC S8754)
standard by Underwriters Laboratories of Canada, 12/01/2014 -
ULC 713
$264.00$158.40Add to cartSTANDARD METHOD OF SYSTEM TESTING -ML
standard by Underwriters Laboratories of Canada, 07/01/2012 -
ULC ORD-C634-16
$200.00$120.00Add to cartGuide for the Investigation of Connectors and Switches for Use with Burglar Alarm Systems
standard by Underwriters Laboratories of Canada, 01/01/2016 -
ULC 716.2
$223.00$133.80Add to cartStandard for Exterior Insulation and Finish Systems (EIFS) – Installation
standard by Underwriters Laboratories of Canada, 2019
ULC 716.3
$50.00 $30.00
Standard for Exterior Insulation and Finish Systems (EIFS) – Design Application (CAN/ULC S716.3-12)
standard by Underwriters Laboratories of Canada, 2019
ULC 716.3 – Standard for Exterior Insulation and Finish Systems (EIFS) – Design Application (CAN/ULC S716.3-12)
This Standard contains requirements for the design, selection and application of exterior cladding utilizing Exterior Insulation and Finish Systems (EIFS) that meet the requirements of CAN/ULC-S716.1, and for the interfaces between EIFS and other building components.
This Standard applies only to EIFS used in combination with a drained air space and liquid applied water resistive barrier (LA-WRB), as an exterior wall cladding system.
This Standard addresses the components forming the substrate to which the EIFS is attached only insofar as they impact the proper performance of the EIFS. This Standard does not address the structural design of the substrate.
Cladding systems where the reinforcement is the supporting element of the rendering, e.g., stucco, are not part of this Standard.
The use of mechanical fasteners is outside the scope of this Standard, – refer to Annex A for further information.
This document does not purport to address all the aspects related to EIFS design, selection and use. The use of this Standard requires a working knowledge of applicable federal, provincial and local building codes and regulations, as there may be other design, selection, or application considerations for specific installations that are not addressed by this standard.
This document is intended to provide detailed information pertaining to the design, selection and application of EIFS for building designers, building code officials, product manufacturers and contractors and to provide information that will promote satisfactory performance and durability of EIFS.
Product Details
- Edition:
- 3
- Published:
- 2019
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
ULC 713
$264.00$158.40Add to cartSTANDARD METHOD OF SYSTEM TESTING -ML
standard by Underwriters Laboratories of Canada, 07/01/2012 -
ULC 742
$216.00$129.60Add to cartStandard for Air Barrier Assemblies – Specification (CAN/ULC S742-20)
standard by Underwriters Laboratories of Canada, 11/09/2020 -
ULC 8753
$264.00$158.40Add to cartStandard for Field-Replaceable Light Emitting Diode (LED) Light Engines (CAN/ULC S8753)
standard by Underwriters Laboratories of Canada, 2013 -
ULC C407-1974
$133.00$79.80Add to cartGuide for the Investigation of High Pressure Gas Manifolds
standard by Underwriters Laboratories of Canada, 01/01/1974