Category
Recently Viewed Products
-
NBBI NB23-2021
$325.00$195.00 -
IEST RP-CC041.1
$455.00$273.00 -
ULC 710.1
$50.00$30.00 -
IEST G-CC1001
$165.00$99.00 -
AWS A3.0M/A3.0
$250.00$150.00
ULC 716.2
$223.00 $133.80
Standard for Exterior Insulation and Finish Systems (EIFS) – Installation
standard by Underwriters Laboratories of Canada, 2019
ULC 716.2 – Standard for Exterior Insulation and Finish Systems (EIFS) – Installation
Product Details
- Edition:
- 3
- Published:
- 2019
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
ULC 718
$50.00$30.00Add to cartSite Quality Assurance Program For Spray Polyurethane Foam
standard by Underwriters Laboratories of Canada, 2018 -
ULC 801
$200.00$120.00Add to cartStandard on Electric Utility Workplace Electrical Safety for Generation, Transmission and Distribution (CAN/ULC S801-14)
standard by Underwriters Laboratories of Canada, 2014 -
ULC 771.1
$176.00$105.60Add to cartGuide for Preparing Thermal Insulation Standards, Part 1 – Material Specifications (ULC S771.1)
standard by Underwriters Laboratories of Canada, 12/24/2016 -
ULC 713
$264.00$158.40Add to cartSTANDARD METHOD OF SYSTEM TESTING -ML
standard by Underwriters Laboratories of Canada, 07/01/2012
ULC 716.2
$223.00 $133.80
Standard for Exterior Insulation and Finish Systems (EIFS) – Installation (CAN/ULC S716.2-12)
standard by Underwriters Laboratories of Canada, 2012
This Standard contains requirements for the installation of Exterior Insulation and Finish Systems (EIFS) that meet the requirements of CAN/ULC-S716.1.
This standard applies to the installation of the EIFS components and to the installation of the water resistive barrier system. It does not apply to the installation of the substrate.
This standard applies to the installation of EIFS for the cladding of walls and, with the exception of decorative projections, does not apply to the installation of EIFS on horizontal surfaces exposed to direct precipitation.
This standard does not address the qualifications and skills that an EIFS installer should possess.
This standard does not address the structural design or integrity of the substrate to which the EIFS is to be attached.
The use of mechanical fasteners is outside the scope of this Standard, but is acceptable as a complement and/or as an alternate to adhesive for attachment where the substrate will not support adhesive attachment of the EIFS.
Product Details
- Edition:
- 2
- Published:
- 2012
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
ULC 8754
$264.00$158.40Add to cartStandard for Holders, Bases, and Connectors for Solid-State (LED) Light Engines and Arrays (CAN/ULC S8754)
standard by Underwriters Laboratories of Canada, 12/01/2014 -
ULC ORD-C634-16
$200.00$120.00Add to cartGuide for the Investigation of Connectors and Switches for Use with Burglar Alarm Systems
standard by Underwriters Laboratories of Canada, 01/01/2016 -
ULC 743.1
$50.00$30.00Add to cartSTANDARD FOR THERMAL INSULATION – LOW PRESSURE APPLIED TWO COMPONENT SPRAY POLYURETHANE FOAM, PART 1: MATERIAL SPECIFICATION
standard by Underwriters Laboratories of Canada, 11/09/2020 -
ULC 743.2
$170.00$102.00Add to cartSTANDARD FOR THERMAL INSULATION – LOW PRESSURE APPLIED TWO COMPONENT SPRAY POLYURETHANE FOAM, PART 2: INSTALLATION
standard by Underwriters Laboratories of Canada, 04/12/2021