Category
Recently Viewed Products
-
Nuclear Criticality Safety Standards Bundle
$1,274.00$764.40 -
ULC 109
$226.00$135.60 -
ASME Y14.5.1
$115.00$69.00 -
AWS B2.1-1-012
$299.00$179.40 -
ULC 2127
$505.00$303.00
ULC 706.1
$50.00 $30.00
Standard for Wood Fibre Insulating Boards for Buildings
standard by Underwriters Laboratories of Canada, 03/19/2020
ULC 706.1 – Standard for Wood Fibre Insulating Boards for Buildings
Product Details
- Edition:
- 4
- Published:
- 03/19/2020
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
ULC 713.2
$264.00$158.40Add to cartSTANDARD FOR SYSTEM TESTING 2 – ML
standard by Underwriters Laboratories of Canada, 10/01/2011 -
ULC 8752
$264.00$158.40Add to cartStandard for Organic Light Emitting Diode (LED) Panels (CAN/ULC S8752)
standard by Underwriters Laboratories of Canada, 04/01/2012 -
ULC 717.1
$175.00$105.00Add to cartStandard for Flat Wall Insulating Concrete Form (ICF) Units
standard by Underwriters Laboratories of Canada, 11/01/2017 -
ULC 770
$253.00$151.80Add to cartStandard Test Method for Determination of Long-term Thermal Resistance of Closed-Cell Thermal Insulating Foams (CAN/ULC S770-15)
standard by Underwriters Laboratories of Canada, 02/01/2015
ULC 706.1
$270.00 $162.00
Standard for Wood Fibre Insulating Boards for Buildings (CAN/ULC-S706.1:2016)
standard by Underwriters Laboratories of Canada, 09/01/2016
This Standard contains the physical property requirements, and test methods to determine these properties, for wood fibre manufactured in the form of faced or unfaced boards, sheets or panels used for insulation in buildings and other applications, whether applied on a building site or in a prefabrication (manufacturing) facility.
The Standard covers two types of wood fibre insulation on the basis of their material properties. The products covered by this standard are classified into Types, Classes and Grades based on their physical properties.
The wood fibre insulating boards shall not be used when the continuous service temperature is outside the range of -30 °C to +80 °C.
The testing and evaluation of a product against this Standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the health and safety aspects associated with its use. Anyone using this Standard has the responsibility to consult the appropriate authorities and to establish health and safety practices, in conjunction with any existing applicable regulatory requirements, prior to its use.
Product Details
- Edition:
- 3
- Published:
- 09/01/2016
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
ULC 716.2
$223.00$133.80Add to cartStandard for Exterior Insulation and Finish Systems (EIFS) – Installation
standard by Underwriters Laboratories of Canada, 2019 -
ULC 9705
$264.00$158.40Add to cartFire Tests – Full Scale Room Test for Surface Products (CAN/ULC 9705-13)
standard by Underwriters Laboratories of Canada, 03/01/2013 -
ULC ORD-C634-16
$200.00$120.00Add to cartGuide for the Investigation of Connectors and Switches for Use with Burglar Alarm Systems
standard by Underwriters Laboratories of Canada, 01/01/2016 -
ULC C407-1974
$133.00$79.80Add to cartGuide for the Investigation of High Pressure Gas Manifolds
standard by Underwriters Laboratories of Canada, 01/01/1974