Recently Viewed Products
-
ULC 138
$162.36
-
AWS PHB-6
$19.80
-
AWS B2.1-1-011
$179.40
-
ULC 110
$158.40
-
ULC 107
$116.40
ULC 142
$82.80
Standard Method of Fire Test for Heat and Visible Smoke Release for Discrete Products (CAN/ULC-S142:2016)
standard by Underwriters Laboratories of Canada, 09/01/2016
ULC 142 – Standard Method of Fire Test for Heat and Visible Smoke Release for Discrete Products (CAN/ULC-S142:2016)
This is a fire test method for determining the fire performance and smoke characteristics of discrete products (including but not limited to electrical and plumbing equipment). These products are subjected to an open flame ignition source and evaluated using a product calorimeter to determine the rate of heat release and the rate of smoke release of the burning product samples.
NOTE: Discrete products as used in this Standard refers to stand-alone, non-continuous product that are not installed in a continuous manner that could be tested in the tunnel equipment referenced in the Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies, CAN/ULC-S102. Examples of these types of products are speakers, valves, etc.
This test method does not provide information on the performance of products in other fire or test conditions. This test does not investigate the toxicity of the products of combustion.
This test does not cover the constructional, electrical, or other performance requirements of the product.
Product Details
- Edition:
- 1
- Published:
- 09/01/2016
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
ULC 771.1
$105.60Add to cartGuide for Preparing Thermal Insulation Standards, Part 1 – Material Specifications (ULC S771.1)
standard by Underwriters Laboratories of Canada, 12/24/2016 -
ULC 716.2
$133.80Add to cartStandard for Exterior Insulation and Finish Systems (EIFS) – Installation
standard by Underwriters Laboratories of Canada, 2019 -
ULC 743.2
$102.00Add to cartSTANDARD FOR THERMAL INSULATION – LOW PRESSURE APPLIED TWO COMPONENT SPRAY POLYURETHANE FOAM, PART 2: INSTALLATION
standard by Underwriters Laboratories of Canada, 04/12/2021 -
ULC 741
$125.40Add to cartStandard for Air Barrier Materials – Specification (CAN/ULC S741-08)
standard by Underwriters Laboratories of Canada, 12/01/2008
