Category
Recently Viewed Products
-
PIP VEFV1100
$1,125.00$675.00 -
PIP CVC01017
$150.00$90.00 -
PIP ARC01016
$50.00$30.00 -
ADA 116
$62.00$37.20 -
ADA 1081
$38.00$22.80
PIP VECV1001
$125.00 $75.00
Vessel/S&T Heat Exchanger Design Criteria, ASME Code Section VIII, Divisions 1 and 2
standard by Process Industry Practices, 11/01/2004
Note to Readers: This Practice contains design criteria for pressure vessels and shell-and-tube heat exchangers. Corresponding subject matter for pressure vessels and shell-and-tube heat exchangers is covered by paragraphs identically numbered. Paragraphs pertaining to pressure vessels are preceded by [V]. Paragraphs pertaining to shell-and-tube heat exchangers are preceded by [E]. Paragraphs pertaining to both are preceded by [V/E]. In addition, ASME Boiler and Pressure Vessel Code, Section VIII, Division 2 requirements are shown in braces { }.
This Practice should be used for pressure vessels built to Division 1 or Division 2 of the ASME Boiler and Pressure Vessel Code, henceforth referred to as the Code. Shell-and-tube heat exchangers are limited to Division 1 in this Practice.
[V] The primary focus of this Practice is to communicate vessel design criteria and methodology from the User to a Designer. This Practice is also intended as guidance for the development of purchase specifications covering the construction of new pressure vessels which meet the philosophy and requirements of Section VIII, Division 1 {or 2} of the Code.
[E] The primary focus of this Practice is to communicate vessel design criteria and methodology from the User to a Designer. This Practice is also intended as guidance for the development of purchase specifications covering the construction of new shell-and-tube heat exchangers which meet the philosophy and requirements of Section VIII, Division 1 of the Code and TEMA Standards of the Tubular Exchangers Manufacturers Association.
[V/E] This Practice must be used in conjunction with PIP VEDST003, PIP VEDV1003, PIP VEFV1100, and PIP VESV1002 in order to comprise a complete vessel purchase specification.
[V/E] Many recognized and generally accepted good engineering construction practices are included herein. However, in light of the many diverse service applications of Code vessels, these practices must be employed with engineering judgment and supplemented as appropriate with requirements related to specific materials of construction, service fluids, operating environments, and vessel geometries. Accordingly, provisions of this Practice may be overridden or supplemented by an Overlay Specification.
[V/E] Standardized pre-designed (off-the-shelf) vessels and heat exchangers are not within the scope of this Practice but are covered in PIP VESSM001.
Product Details
- Published:
- 11/01/2004
- File Size:
- 1 file , 270 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
PIP VESSP002
$100.00$60.00Add to cartSupplemental Purchase and Fabrication Specification for Shell and Plate Heat Exchangers [Technical Revision]
Published by Publication Date Number of Pages PIP 06/01/2021 9 -
PIP VESPMI01
$150.00$90.00Add to cartPositive Material Identification Specification [Technical Correction]
Published by Publication Date Number of Pages PIP 02/01/2019 12 -
PIP VESV1004
$100.00$60.00Add to cartTitanium Clad Design and Fabrication Specification for Carbon Steel Pressure Vessels and Shell and Tube Exchangers [New Practice]
Published by Publication Date Number of Pages PIP 04/01/2022 16 -
PIP VEFV1100M
$1,245.00$747.00Add to cartVessel/S&T Heat Exchanger Standard Details (Metric Units) [Technical Correction]
Published by Publication Date Number of Pages PIP 01/01/2019 55
PIP VECV1001
$115.00 $69.00
Design Criteria and Purchasing Requirements for Vessels ASME Code Section VIII, Divisions 1 and 2 [Technical Correction]
standard by Process Industry Practices, 01/01/2019
This Practice provides requirements for use by a Purchaser for determining the design criteria for pressure vessels constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division 2, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces { }.
This Practice describes the requirements for the design, materials of construction, inspection and testing of pressure vessels constructed in accordance with Code, Section VIII, Division 1 {or 2}. Guidance is also provided for the development of purchase specifications for the construction of new pressure vessels which meet the philosophy and requirements of Code, Section VIII, Division 1 {or 2}.
This Practice also applies to bulk solids product containers, electric immersion process heaters, shell and plate exchangers, shell and tube exchangers, and air-cooled exchangers. See PIP VECBI001 and PIP VESBI002 for the additional requirements specific to bulk solids product containers only. See PIP VESEH001 for the additional requirements specific to electric immersion process heaters. See PIP VECSP001 and PIP VESSP002 for the additional requirements specific to shell and plate exchangers only. See PIP VECST001 and PIP VESST002 for the additional requirements specific to shell and tube exchangers only. See PIP VESAC001 for the additional requirements specific to air-cooled exchangers only.
This Practice is intended to be used for the purchase of vessels where the Manufacturer is also responsible for performing detailed design for the vessels in accordance with the Code and PIP VESV1002. If Purchaser also performs a detailed design, the design shall also be in accordance with PIP VESV1002.
Product Details
- Published:
- 01/01/2019
- Number of Pages:
- 25
- File Size:
- 1 file , 710 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
PIP VESSM001
$100.00$60.00Add to cartSpecification for Small Vessels and Heat Exchangers with Limited Design Conditions [Technical Revision]
Published by Publication Date Number of Pages PIP 10/01/2017 12 -
PIP VESAC001-EEDS
$50.00$30.00Add to cartElectronic Entry Data Sheet for Air-Cooled Heat Exchanger Specification (Supplement to API STD 661) [New Practice]
Published by Publication Date Number of Pages PIP 01/01/2016 0 -
PIP VEETA001
$135.00$81.00Add to cartTank Selection Guide [Technical Revision]
Published by Publication Date Number of Pages PIP 11/01/2016 29 -
PIP VESFG001
$275.00$165.00Add to cartFiberglass Tank and Vessel Specification [Technical Revision]
Published by Publication Date Number of Pages PIP 12/01/2019 41
PIP VECV1001
$125.00 $75.00
Vessel Design Criteria ASME Code Section VIII, Divisions 1 and 2 [Editorial Revision]
standard by Process Industry Practices, 05/01/2009
This Practice provides vessel design criteria and methodology from the User to a Designer. This Practice is also intended as guidance for the development of purchase specifications covering the construction of new pressure vessels which meet the philosophy and requirements of Section VIII, Division 1 {or 2} of the Code.
This Practice shall be used in conjunction with PIP VEDV1003 – Vessel Drawing/Data Sheet and Instructions, PIP VEDV1003-D_EEDS – Vessel Drawing Data Sheet, PIP VEFV1100 – Vessel/S&T Heat Exchanger Standard Details, and PIP VESV1002 – Vessel Fabrication Specification ASME Code Section VIII, Divisions 1 and 2, in order to comprise a complete vessel purchase specification.
Product Details
- Published:
- 05/01/2009
- Number of Pages:
- 38
- File Size:
- 1 file , 150 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
PIP VESV1003
$100.00$60.00Add to cartSpecial Fabrication Requirements for Welded Vessels and Tanks to be Lined [Technical Revision]
Published by Publication Date Number of Pages PIP 01/01/2022 8 -
PIP VESFG001
$275.00$165.00Add to cartFiberglass Tank and Vessel Specification [Technical Revision]
Published by Publication Date Number of Pages PIP 12/01/2019 41 -
PIP VESAC001-EEDS
$50.00$30.00Add to cartElectronic Entry Data Sheet for Air-Cooled Heat Exchanger Specification (Supplement to API STD 661) [New Practice]
Published by Publication Date Number of Pages PIP 01/01/2016 0 -
PIP VEFTA100
$775.00$465.00Add to cartTank Miscellaneous Details [New Practice]
Published by Publication Date Number of Pages PIP 04/01/2010 32
PIP VECV1001
$120.00 $72.00
Vessel Design Criteria ASME Code Section VIII, Divisions 1 and 2 [Complete Revision]
standard by Process Industry Practices, 09/01/2017
This Practice provides requirements for use by a Purchaser for determining the design criteria for pressure vessels constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division 2, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces { }.This Practice provides requirements for purchasing pressure vessels that are to be designed and fabricated by a Manufacturer.
This Practice describes the requirements for the design, materials of construction, inspection and testing of pressure vessels constructed in accordance with Code, Section VIII, Division 1 {or 2}. This Practice also provides guidance for the development of purchase specifications for the construction of new pressure vessels which meet the philosophy and requirements of Code, Section VIII, Division 1 {or 2}.
Product Details
- Published:
- 09/01/2017
- Number of Pages:
- 26
- File Size:
- 1 file , 210 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
PIP VESTA002
$100.00$60.00Add to cartAtmospheric Storage Tank Specification (Supplement to API Standard 650) [Technical Revision]
Published by Publication Date Number of Pages PIP 08/01/2020 19 -
PIP VEETA001
$135.00$81.00Add to cartTank Selection Guide [Technical Revision]
Published by Publication Date Number of Pages PIP 11/01/2016 29 -
PIP VESPMI01-EEDS
$75.00$45.00Add to cartElectronic Entry Data Sheet for Positive Material Identification
Published by Publication Date Number of Pages PIP 02/01/2019 0 -
PIP VESSP002
$100.00$60.00Add to cartSupplemental Purchase and Fabrication Specification for Shell and Plate Heat Exchangers [Technical Revision]
Published by Publication Date Number of Pages PIP 06/01/2021 9
PIP VECV1001
$125.00 $75.00
Vessel Design Criteria ASME Code Section VIII, Divisions 1 and 2 [Complete Revision]
standard by Process Industry Practices, 03/01/2012
This Practice provides requirements for use by a Purchaser for determining the design criteria for pressure vessels constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division 2, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces { }.This Practice provides requirements for purchasing pressure vessels that are to be designed and fabricated by a Manufacturer.
This Practice describes the requirements for the design, materials of construction, inspection and testing of pressure vessels constructed in accordance with Code, Section VIII, Division 1 {or 2}. This Practice also provides guidance for the development of purchase specifications for the construction of new pressure vessels which meet the philosophy and requirements of Code, Section VIII, Division 1 {or 2}.
Product Details
- Published:
- 03/01/2012
- Number of Pages:
- 28
- File Size:
- 1 file , 310 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
PIP VESPMI01
$150.00$90.00Add to cartPositive Material Identification Specification [Technical Correction]
Published by Publication Date Number of Pages PIP 02/01/2019 12 -
PIP VEEVJ001
$175.00$105.00Add to cartGasket Guidelines [New Practice]
Published by Publication Date Number of Pages PIP 03/01/2015 37 -
PIP VESLP001
$100.00$60.00Add to cartLow-Pressure, Welded Vessel Specification [Technical Revision]
Published by Publication Date Number of Pages PIP 05/01/2022 22 -
PIP VEFTA100
$775.00$465.00Add to cartTank Miscellaneous Details [New Practice]
Published by Publication Date Number of Pages PIP 04/01/2010 32
PIP VECV1001
$125.00 $75.00
Vessel/S&T Heat Exchanger Design Criteria, ASME Code Section VIII, Divisions 1 and 2
standard by Process Industry Practices, 02/01/2007
This Practice provides vessel design criteria and methodology from the User to a Designer. This Practice is also intended as guidance for the development of purchase specifications covering the construction of new pressure vessels which meet the philosophy and requirements of Section VIII, Division 1 {or 2} of the Code.
This Practice shall be used in conjunction with PIP VEDV1003 – Vessel Drawing/Data Sheet and Instructions, PIP VEDV1003-D_EEDS – Vessel Drawing Data Sheet, PIP VEFV1100 – Vessel/S&T Heat Exchanger Standard Details, and PIP VESV1002 – Vessel Fabrication Specification ASME Code Section VIII, Divisions 1 and 2, in order to comprise a complete vessel purchase specification.
Product Details
- Published:
- 02/01/2007
- File Size:
- 1 file , 160 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
PIP VESEH001
$100.00$60.00Add to cartElectric Immersion Process Heater Specification
Published by Publication Date Number of Pages PIP 12/01/2016 9 -
PIP VESLP001
$100.00$60.00Add to cartLow-Pressure, Welded Vessel Specification [Technical Revision]
Published by Publication Date Number of Pages PIP 05/01/2022 22 -
PIP VESV1002
$210.00$126.00Add to cartDesign and Fabrication Specification for Vessels ASME Code Section VIII, Divisions 1 and 2 [Technical Correction]
Published by Publication Date Number of Pages PIP 01/01/2019 44 -
PIP VESAC001
$180.00$108.00Add to cartAir-Cooled Heat Exchanger Specification (Supplement to API STD 661, 7th Edition) [Technical Revision]
Published by Publication Date Number of Pages PIP 05/01/2022 28
PIP VECV1001 – Design Criteria and Purchasing Requirements for Vessels ASME Code Section VIII, Divisions 1 and 2 [Technical Correction]
This Practice provides requirements for use by a Purchaser for determining the design criteria for pressure vessels constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division 2, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces { }.
This Practice describes the requirements for the design, materials of construction, inspection and testing of pressure vessels constructed in accordance with Code, Section VIII, Division 1 {or 2}. Guidance is also provided for the development of purchase specifications for the construction of new pressure vessels which meet the philosophy and requirements of Code, Section VIII, Division 1 {or 2}.
This Practice also applies to bulk solids product containers, electric immersion process heaters, shell and plate exchangers, shell and tube exchangers, and air-cooled exchangers. See PIP VECBI001 and PIP VESBI002 for the additional requirements specific to bulk solids product containers only. See PIP VESEH001 for the additional requirements specific to electric immersion process heaters. See PIP VECSP001 and PIP VESSP002 for the additional requirements specific to shell and plate exchangers only. See PIP VECST001 and PIP VESST002 for the additional requirements specific to shell and tube exchangers only. See PIP VESAC001 for the additional requirements specific to air-cooled exchangers only.
This Practice is intended to be used for the purchase of vessels where the Manufacturer is also responsible for performing detailed design for the vessels in accordance with the Code and PIPVESV1002. If Purchaser also performs a detailed design, the design shall also be in accordance with PIP VESV1002.
The following are not covered by this Practice:
a. Standardized pre-designed (i.e., off-the-shelf) vessels (see PIP VESSM001)
b. Vessels with layered construction
c. Small vessels and low-pressure vessels (see PIP VESSM001 and PIP VESLP001)
d. Process design of trays and other removable internals
Product Details
- Published:
- 07/01/2020
- Number of Pages:
- 25
- File Size:
- 1 file , 210 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
PIP VESBI002
$210.00$126.00Add to cartDesign and Fabrication of Bulk Solids Product Containers [Technical Revision]
Published by Publication Date Number of Pages PIP 05/01/2017 44 -
PIP VESFG001
$275.00$165.00Add to cartFiberglass Tank and Vessel Specification [Technical Revision]
Published by Publication Date Number of Pages PIP 12/01/2019 41 -
PIP VESHP001
$150.00$90.00Add to cartHairpin Heat Exchanger Specification [Technical Revision]
Published by Publication Date Number of Pages PIP 01/01/2022 18 -
PIP VESPMI01
$150.00$90.00Add to cartPositive Material Identification Specification [Technical Correction]
Published by Publication Date Number of Pages PIP 02/01/2019 12