Category
Recently Viewed Products
-
ADA 102
$38.00$22.80 -
PIP ARS08111
$100.00$60.00 -
ADA 1070
$38.00$22.80 -
ADA 1079
$38.00$22.80 -
PIP CTEG1000
$100.00$60.00
PIP VESSM001
$100.00 $60.00
Specification for Small Vessels and Heat Exchangers with Limited Design Conditions [Complete Revision]
standard by Process Industry Practices, 02/01/2012
This Practice provides requirements for the construction of a small pressure vessel or heat exchanger, both with limited design conditions.This Practice describes the general requirements for the design, materials, fabrication, examination, inspection, testing, certification and pressure relief of:
a. Three classes of small pressure vessels
b. Heat exchangers with the limited design conditions shown in Table 1a or 1b of this Practice
This Practice is applicable to:
a. The standard, pre-designed pressure vessels and heat exchangers supplied as part of pre-engineered package units (e.g., refrigeration and air-compressor systems)
b. “Off-the-shelf” vessels and exchangers
c. Vessels (e.g., filters) or exchangers built from the Manufacturer’s standard parts
For purposes of this Practice, it is understood that the term “vessel” includes heat exchangers.
This Practice is not intended for the following:
a. Vessel in “Lethal Service” (as defined in Section VIII, Division 1 of the ASME Boiler and Pressure Vessel Code (Code))
b. Vessels for which design wall thickness is governed by loadings from wind pressure or earthquake forces
c. Custom shell-and-tube heat exchangers outside the scope of Table 1a or 1b.
Product Details
- Published:
- 02/01/2012
- Number of Pages:
- 12
- File Size:
- 1 file , 230 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
PIP VEFTA100
$775.00$465.00Add to cartTank Miscellaneous Details [New Practice]
Published by Publication Date Number of Pages PIP 04/01/2010 32 -
PIP VESST002 (R2018)
$100.00$60.00Add to cartSupplemental Design and Fabrication Specification for Shell and Tube Heat Exchangers, ASME Code Section VIII, Div 1 and 2 [New Practice]
Published by Publication Date Number of Pages PIP 03/01/2012 15 -
PIP VESLP001
$100.00$60.00Add to cartLow-Pressure, Welded Vessel Specification [Technical Revision]
Published by Publication Date Number of Pages PIP 05/01/2022 22 -
PIP VESPMI01-EEDS
$75.00$45.00Add to cartElectronic Entry Data Sheet for Positive Material Identification
Published by Publication Date Number of Pages PIP 02/01/2019 0
PIP VESSM001 – Specification for Small Vessels and Heat Exchangers with Limited Design Conditions [Technical Revision]
This Practice provides requirements for the construction of a small pressure vessel or heat exchanger, both with limited design conditions.This Practice describes the general requirements for the design, materials, fabrication, examination, inspection, testing, certification and pressure relief of:
a. Three classes of small pressure vessels
b. Heat exchangers with the limited design conditions shown in Table 1a or 1b of this Practice
This Practice is applicable to:
a. The standard, pre-designed pressure vessels and heat exchangers supplied as part of pre-engineered package units (e.g., refrigeration and air-compressor systems)
b. “Off-the-shelf” vessels and exchangers
c. Vessels (e.g., filters) or exchangers built from the Manufacturer’s standard parts
For purposes of this Practice, it is understood that the term “vessel” includes heat exchangers.
This Practice is not intended for the following:
a. Vessel in “Lethal Service” (as defined in Section VIII, Division 1 of the ASME Boiler and Pressure Vessel Code (Code))
b. Vessels for which design wall thickness is governed by loadings from wind pressure or earthquake forces
c. Custom shell-and-tube heat exchangers outside the scope of Table 1a or 1b.
Product Details
- Published:
- 10/01/2017
- Number of Pages:
- 12
- File Size:
- 1 file , 210 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
PIP VESST002 (R2018)
$100.00$60.00Add to cartSupplemental Design and Fabrication Specification for Shell and Tube Heat Exchangers, ASME Code Section VIII, Div 1 and 2 [New Practice]
Published by Publication Date Number of Pages PIP 03/01/2012 15 -
PIP VEFV1100M
$1,245.00$747.00Add to cartVessel/S&T Heat Exchanger Standard Details (Metric Units) [Technical Correction]
Published by Publication Date Number of Pages PIP 01/01/2019 55 -
PIP VESAC00-T
$50.00$30.00Add to cartInspection and Testing Requirements Sheet for Air-Cooled Heat Exchanger Specification (Supplement to API STD 661, 7th Edition) [Editorial Revision]
Published by Publication Date Number of Pages PIP 01/01/2016 2 -
PIP VESV1003
$100.00$60.00Add to cartSpecial Fabrication Requirements for Welded Vessels and Tanks to be Lined [Technical Revision]
Published by Publication Date Number of Pages PIP 01/01/2022 8
PIP VESSM001
$100.00 $60.00
Specification for Small Vessels and Heat Exchangers with Limited Design Conditions
standard by Process Industry Practices, 09/01/2007
This Practice describes the general materials, design, fabrication, examination, inspection, testing, and documentation requirements for pressure vessels with limited design conditions. This Practice designates minimum general requirements for the construction of three classes of small pressure vessels (including heat exchangers) with the limited design conditions shown in Table 1. See Section 5.3 for material of construction limitations. This Practice is intended to apply to the Manufacturer?s standard, pre-designed pressure vessels and heat exchangers supplied as part of pre-engineered package units (e.g., refrigeration and air-compressor systems), “off-the-shelf” items and vessels (e.g., filters) built from the Manufacturer’s standard parts. Use of this Practice for custom-designed vessels is limited to applications that have been reviewed and approved in writing by the Purchaser. Special requirements are covered in the Vessel Specifications (see Section 3 for definition).
Product Details
- Published:
- 09/01/2007
- File Size:
- 1 file , 63 KB
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
PIP VESV1004
$100.00$60.00Add to cartTitanium Clad Design and Fabrication Specification for Carbon Steel Pressure Vessels and Shell and Tube Exchangers [New Practice]
Published by Publication Date Number of Pages PIP 04/01/2022 16 -
PIP VESFG001
$275.00$165.00Add to cartFiberglass Tank and Vessel Specification [Technical Revision]
Published by Publication Date Number of Pages PIP 12/01/2019 41 -
PIP VESTA002
$100.00$60.00Add to cartAtmospheric Storage Tank Specification (Supplement to API Standard 650) [Technical Revision]
Published by Publication Date Number of Pages PIP 08/01/2020 19 -
PIP VESPMI01
$150.00$90.00Add to cartPositive Material Identification Specification [Technical Correction]
Published by Publication Date Number of Pages PIP 02/01/2019 12