UL 1004-6
$301.20
Standard for Servo and Stepper Motors
| Published by | Publication Date | Number of Pages |
| UL | 06/06/2012 | 13 |
UL 1004-6 – Standard for Servo and Stepper Motors
Please note: All interim revisions for this edition available at time of your purchase will be included.
UL 1004-6 is intended to be read together with the Standard for Rotating Electrical Machines – General Requirements, UL 1004-1. The requirements in this Standard supplement or amend the requirements in UL 1004-1. The requirements of UL 1004-1 apply unless modified by this Standard.
This Standard applies to servo and stepper motors. The requirements in this Standard are intended to evaluate the suitability of the motor for normal use when fed from an appropriate controller (drive) through its manufacturer declared normal operating region.
This Standard does not address:
- The efficacy of motor overtemperature protection under normal or abnormal conditions; nor
- The operation of a motor in hazardous (Classified) locations.
Product Details
- Edition:
- 2
- Published:
- 06/06/2012
- Number of Pages:
- 13
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
UL Subject 2277
$150.00Add to cartOutline of Investigation for Flexible Motor Supply Cable and Wind Turbine Tray Cable (Outline, 8/16/2010)
standard by Underwriters Laboratories, 08/16/2010 -
UL Subject 50V
$150.00Add to cartOutline of Investigation for Infrared Viewports (Outline, 5/11/2007)
standard by Underwriters Laboratories, 05/11/2007 -
UL Subject 6200
$150.00Add to cartOutline of Investigation for Controls For Stationary Engine Driven Assemblies (Outline, 6/30/2015)
standard by Underwriters Laboratories, 06/30/2015 -
UL Subject 9703
$150.00Add to cartOutline of Investigation for Distributed Generation Wiring Harnesses (Outline, 8/2/2011)
standard by Underwriters Laboratories, 08/02/2011
