This Practice provides a Data Sheet with instructions to designers for preparation of the User supplied Vessel Drawing/Data Sheet. The Vessel Drawing/Data Sheet, prepared in conjunction with PIP VECV1001 – Vessel Design Criteria ASME Code Section VIII, Divisions 1 and 2, PIP VESV1002 – Vessel Fabrication Specification ASME Code Section VIII, Divisions 1 and 2, and PIP VEFV1100 – Vessel/S&T Heat Exchanger Standard Details, completes a specification suitable for obtaining comprehensive bids and subsequent purchase of pressure vessels.

This Practice identifies information to be placed on PIP VEDV1003 Pressure Vessels Data Sheet.

Product Details

Published:

02/01/2007

File Size:

1 file , 94 KB

Note:

This product is unavailable in Ukraine, Russia, Belarus

This Practice provides data forms and the associated instructions for specifying requirements for pressure vessels constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division 2, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces { }.

This Practice contains three data forms for providing requirements for cylindrical pressure vessels having internal design pressures equal to or greater than 15 psig (103 kPa) and/or full vacuum external pressure at the top of the vessel in its normal operating position, and are welded, shop- and field-fabricated, and in accordance with the requirements of the Code, Section VIII, Division 1 {or Division 2}.

Product Details

Published:

03/01/2012

Number of Pages:

35

File Size:

1 file , 750 KB

Note:

This product is unavailable in Ukraine, Russia, Belarus

PIP VEDV1003 – Documentation Requirements for Vessels ASME Code Section VIII, Divisions 1 and 2 [Reaffirmation with Editorial Revision]

This Practice provides data forms and the associated instructions for specifying requirements for pressure vessels constructed in accordance with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 or Division 2, henceforth referred to as the Code. Requirements that are specific to Code, Section VIII, Division 2 are shown in braces { }.

This Practice is used with PIP VECV1001 and VESV1002 to specify information necessary for the manufacturer to design and fabricate a pressure vessel.

Product Details

Published:

10/01/2020

Number of Pages:

35

File Size:

1 file , 800 KB

Note:

This product is unavailable in Ukraine, Russia, Belarus