Category
BS 10621 – Lock assemblies in which the operating mode can be switched between the normal BS 8621 operating mode and a secure mode in which no egress is possible
BS 10621:2017 specifies performance requirements and test methods for a thief-resistantmechanically operated single-point lock assembly (including locking plates, fixing screws, fittinginstructions, cylinders and protective furniture, where appropriate) that:
- a) incorporates a lock conforming to BS EN 12209:2016 that, under normal conditions, can beunlocked from the inside without the use of a key, thereby allowing keyless egress;
- b) can be changed to a secure (no egress) mode by a secondary positive locking action; and
- c) is used in doors, window doors and entrance doors in buildings.
This standard covers only those thief-resistant lock assemblies that are intended for use in dwellingswhere there is an alternative escape route. It does not cover thief-resistant lock assemblies thatprovide keyless egress at all times since these are covered by BS 8621, nor does it cover thiefresistantlock assemblies that require the use of a removable key for egress since these arecovered by BS 3621.
Cross References:
BS 7398:1991
BS EN 1303:2015
PAS 24:2016
BS EN 12209:2016 BS 3621:2017
BS EN ISO/IEC 17065:2012
BS 8621:2017
305/2011/EU
Construction Products Regulations 2013
Building Regulations 2010
All current amendments available at time of purchase are included with the purchase of this document.
Product Details
- Published:
- 06/08/2017
- ISBN(s):
- 9780580935008
- Number of Pages:
- 18
- File Size:
- 1 file , 1.8 MB
- Product Code(s):
- 30338195, 30338195, 30338195
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
BS TH 42069
$1,905.00$1,143.00Add to cartPressure Vessels: Germany
Published by Publication Date Number of Pages BSI 10/30/2000 0 -
BS X 42
$170.18$102.11Add to cartSpecification for a Chromium(VI)-free pre-treatment primer
Published by Publication Date Number of Pages BSI 11/18/2020 16 -
BS TA 43
$40.64$24.38Add to cartSpecification for forging stock of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm^2) (limiting ruling section 65 mm)
Published by Publication Date Number of Pages BSI 06/14/1972 6 -
BS Z 18
$322.58$193.55Add to cartSpace data and information transfer systems. Standard formatted data units. Referencing environment
Published by Publication Date Number of Pages BSI 12/15/2000 54