AMERICAN NATIONAL STANDARD Mechanical vibration – Measurement and evaluation of machine vibration – Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min

Published by	Publication Date	Number of Pages
ASA	2019	38

Preview

ASA S2.80 Part 2 – AMERICAN NATIONAL STANDARD Mechanical vibration – Measurement and evaluation of machine vibration – Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min

This nationally adopted international standard is applicable to land-based gas turbines, steam turbines and generators (whether coupled with gas and/or steam turbines) with power outputs greater than 40 MW, fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min or 3 600 r/min. The criteria provided in this document can be applied to the vibration of the gas turbine, steam turbine and generator (including synchronizing clutches). This document establishes provisions for evaluating the severity of the following in-situ, broad-band vibration:
a) structural vibration at all main bearing housings or pedestals measured radial (i.e. transverse) to the shaft axis;
b) structural vibration at thrust bearing housings measured in the axial direction;
c) vibration of rotating shafts radial (i.e. transverse) to the shaft axis at, or close to, the main bearings.

Product Details

Published:: 2019
ANSI:: ANSI Approved
Number of Pages:: 38
File Size:: 1 file , 890 KB
Note:: This product is unavailable in Ukraine, Russia, Belarus

ASA S2.80 Part 2

AMERICAN NATIONAL STANDARD Mechanical vibration – Measurement and evaluation of machine vibration – Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min

Product Details

American National Standard Methods to Define and Measure the Residual Sound in Protected Natural and Quiet Residential Areas

Procedure for Determining Audiograms in Toothed Whales through Evoked Potential Methods

American National Standard Electroacoustics – Simulators of Human Head and Ear – Part 1: Ear Simulator for the Measurement of Supra-aural and Circumaural Earphones

American National Standard – Acoustics – Estimation of Noise-induced Hearing Loss – Part 1: Method for Calculating Expected Noise-induced Permanent Threshold Shift (a modified nationally adopted international standard)


Digital PDF	Multi-User Access	Printable

ASA S2.80 Part 2

AMERICAN NATIONAL STANDARD Mechanical vibration – Measurement and evaluation of machine vibration – Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min

Product Details

Related products

ASA S3/SC1.100

American National Standard Methods to Define and Measure the Residual Sound in Protected Natural and Quiet Residential Areas

ASA S3/SC1.6

Procedure for Determining Audiograms in Toothed Whales through Evoked Potential Methods

ASA S3.55 Part 1

American National Standard Electroacoustics – Simulators of Human Head and Ear – Part 1: Ear Simulator for the Measurement of Supra-aural and Circumaural Earphones

ASA S3.44 Part 1

American National Standard – Acoustics – Estimation of Noise-induced Hearing Loss – Part 1: Method for Calculating Expected Noise-induced Permanent Threshold Shift (a modified nationally adopted international standard)