Category
AASHTO TP 84
$89.00 $53.40
Standard of Method of Test for Evaluation of Adhesive Anchors in Concrete Under Sustained Loading Conditions
Published by | Publication Date | Number of Pages |
AASHTO | 2011 | 17 |
AASHTO TP 84 – Standard of Method of Test for Evaluation of Adhesive Anchors in Concrete Under Sustained Loading Conditions
Adhesive anchor systems have widespread use in transportation structures such as bridge widening, concrete repair and rehabilitation, barrier retrofitting, utility installation on existing structures, and tunneling. These systems are used to anchor threaded rod and reinforcing bars in concrete. This test method determines an adhesive anchor’s ability to withstand sustained tensile loads under normal conditions.
This test method applies to structures used in AASHTO applications and is applicable to adhesive anchor systems with steel anchors in predrilled holes in concrete.
This test method determines the time to failure for adhesive anchors in concrete at various levels of sustained loading.
The static load test is developed from ASTM E 488 and the sustained load (creep) test is modified from ASTM E 1512 and ICC-ES AC308.
This test method only addresses the effect of sustained loads on adhesive anchors. Numerous other factors affect the load capacity of adhesive anchors and a complete battery of tests is essential to evaluate an adhesive anchor. Refer to ICC-ES AC308 for a listing of some of the many factors and related test methods that apply to adhesive anchors.
Product Details
- Published:
- 2011
- Number of Pages:
- 17
- File Size:
- 1 file , 2.2 MB
- Product Code(s):
- TP084-11-UL, TP084-11-UL, TP084-11-UL
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
AASHTO TP 137
$78.00$46.80Add to cartStandard Method of Test for Box Test in Slip Form Paving of Fresh Portland Cement Concrete
Published by Publication Date Number of Pages AASHTO 2020 7 -
AASHTO TP 140
$78.00$46.80Add to cartProvisional Standard Method of Test for Moisture Sensitivity Using Hydrostatic Pore Pressure to Determine Cohesion and Adhesion Strength of Compacted Asphalt Mixture Specimens
Published by Publication Date Number of Pages AASHTO 2020 9 -
AASHTO TP 82
$66.00$39.60Add to cartStandard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Water Displacement Measured by Pressure Sensor
Published by Publication Date Number of Pages AASHTO 2010 4 -
AASHTO TP 136
$78.00$46.80Add to cartStandard Method of Test for Determining the Degree of Saturation of Hydraulic-Cement Concrete
Published by Publication Date Number of Pages AASHTO 2020 6