Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test

Published by	Publication Date	Number of Pages
AASHTO	2021	29

AASHTO TP 133 – Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test

This test method covers procedures for preparing and testing both laboratory-compacted and fieldcored asphalt mixture specimens to determine the damage characteristic curve and fatigue analysis parameters via the direct tension cyclic fatigue test using the asphalt mixture performance tester (AMPT).
This standard is intended for dense-graded mixtures with nominal maximum aggregate size less than or equal to 19.0 mm (0.75 in.). Mixtures with a nominal maximum aggregate size greater than 19.0 mm (0.75 in.) should be tested following TP 107.

Product Details

Published:: 2021
Number of Pages:: 29
File Size:: 1 file , 3.8 MB
Product Code(s):: TP133-21-UL, TP133-21-UL, TP133-21-UL
Note:: This product is unavailable in Ukraine, Russia, Belarus

AASHTO TP 133

Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test

Product Details

Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method

Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

Standard Method of Test for Determining the Potential Alkali-Silica Reactivity of Coarse Aggregates (TFHRC-TFAST)

Uniform Audit and Accounting Guide for Audits of Architectural and Engineering (A/E) Consulting Firms, 2016 Edition


Digital PDF	Multi-User Access	Printable

AASHTO TP 133

Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test

Product Details

Related products

AASHTO TP 98

Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method

AASHTO TP 69

Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

AASHTO TP 144

Standard Method of Test for Determining the Potential Alkali-Silica Reactivity of Coarse Aggregates (TFHRC-TFAST)

AASHTO UAAG-4

Uniform Audit and Accounting Guide for Audits of Architectural and Engineering (A/E) Consulting Firms, 2016 Edition