Category
Recently Viewed Products
-
AGA J02019
$193.00$115.80 -
ESD ADV1.0
$18.00$10.80 -
AGA Z380122
$645.00$387.00 -
IT service management standards and guidance kit
$342.90$205.74 -
CGA E-3
$13.00$7.80
ULC 106
$185.00 $111.00
Standard Method for Fire Tests of Window and Glass Block Assemblies (CAN/ULC S106-15)
standard by Underwriters Laboratories of Canada, 08/01/2015
ULC 106 – Standard Method for Fire Tests of Window and Glass Block Assemblies (CAN/ULC S106-15)
This fire test method is applicable to window and glass block assemblies and other light transmitting assemblies, for use as closures in openings in walls and partitions that are fire separations in accordance to the National Building Code of Canada.
It is the intent that the tests made in conformity with this Standard will develop data to enable regulatory bodies to determine the suitability of window, glass block and other light transmitting assemblies for use in locations where fire protection of a specified duration is required. However, such tests shall not be construed as determining suitability of these assemblies for use after exposure to fire.
Glazing materials and assemblies evaluated for fire resistance shall be in accordance to the requirements in CAN/ULC-S101, Standard Method of Fire Endurance Tests of Building Construction and Materials.”
Product Details
- Edition:
- 3
- Published:
- 08/01/2015
- Note:
- This product is unavailable in Ukraine, Russia, Belarus
Related products
-
ULC 774
$270.00$162.00Add to cartStandard Laboratory Guide for the Determination of Volatile Organic Compound Emissions from Polyurethane Foam (CAN/ULC S774)
standard by Underwriters Laboratories of Canada, 03/17/2020 -
ULC 713
$264.00$158.40Add to cartSTANDARD METHOD OF SYSTEM TESTING -ML
standard by Underwriters Laboratories of Canada, 07/01/2012 -
ULC 716.3
$50.00$30.00Add to cartStandard for Exterior Insulation and Finish Systems (EIFS) – Design Application (CAN/ULC S716.3-12)
standard by Underwriters Laboratories of Canada, 2019 -
ULC 743.2
$170.00$102.00Add to cartSTANDARD FOR THERMAL INSULATION – LOW PRESSURE APPLIED TWO COMPONENT SPRAY POLYURETHANE FOAM, PART 2: INSTALLATION
standard by Underwriters Laboratories of Canada, 04/12/2021